# Tooling

Tooling tracks the molds, dies, fixtures, gauges and other tools that are mounted on your machines: what each tool makes per
cycle, how fast it runs on each machine, where it is mounted, and how much life it has left. A tool's rate becomes the
standard rate of the runs on its machine, so OEE performance is measured against the tool that's actually mounted.

![Tools list](https://docs.kanoa.ai/img/tooling/tools-list.png)

## How It Fits Together

A production mold is more than its cavities. **Frames** (the fixed and moving halves) form its structure, **pockets** in
the frames hold **inserts**, and the inserts shape the part. Kanoa models each of these as a tool, and the whole assembly
is the tooling.

![An injection mold opened into its fixed and moving halves (the frames), showing an insert held in a pocket, with panels explaining tooling, frames, inserts and pockets, and the molded part they make](https://docs.kanoa.ai/img/tooling/injection-mould-tooling.jpg)

- **Tools are assets.** A tool is an asset whose type is a tooling type (Mold, Mold Insert, Die, Jig, Fixture, Gauge,
  Cutting Tool, Change Part, Tool, or one you add). It sits in the asset tree, usually under a site, and keeps its history
  like any other asset. See [Tools and Tool Types](./tooling/tools.md).
- **Positions** describe what a tool makes each time the machine cycles: one shot of a mold, one stroke of a die. Each
  cavity or station adds its parts per cycle. See [Positions](./tooling/positions.md).
- **Required tooling** says which tools an item needs on a machine: it's the link from an item to its tools. It drives
  the warning when a run starts without them, and the tool reservations of scheduled operations. See
  [Required Tooling](./tooling/required-tooling.md).
- **Fit rules** (optional) say where a tool may be mounted: which machines, or which mold bases' pockets. A tool with no
  rules fits any machine in its site that uses tooling. See [Fit Rules](./tooling/fit-rules.md).
- **Cycle rates** say how fast a tool runs on a machine. A run's standard rate is the tool's cycle rate times its parts per
  cycle, unless the item has its own rate for that tool. See [Cycle Rates and Item Rates](./tooling/rates.md).
- **Mounting** puts a tool on a machine (or an insert into a mold base). Mounting, unmounting and swapping a tool start a
  new run when they change the rate. See [Mounting Tools](./tooling/mounting.md).
- **Tool life** counts the cycles and running time each tool has done, against its PM, refurbishment, lifetime and
  calibration limits, and gives it a status. See [Tool Life](./tooling/tool-life.md).
- **Tags** let a machine's PLC mount a tool, block positions, and report cycles and shot counter readings. See
  [Tooling Tags](./tooling/tooling-tags.md).

## Setting Up a Tool: Where Everything Lives

New to tooling? [Getting Started with Tooling](./tooling/getting-started.md) walks through these steps with one mold.

| To set... | Go to | Notes |
| --- | --- | --- |
| Which machines take tools | **Configuration > Ops > Assets**, the machine's **Uses tooling** checkbox | The machine must be OEE-enabled. |
| The tool itself: its type, location and life limits | **Configuration > Ops > Tooling**, **Add a tool**, then the **Details** tab | Its location's site decides which machines it can go on. See [Tools and Tool Types](./tooling/tools.md). |
| What the tool makes each cycle, and how many | The tool's **Positions** tab | One row per cavity, station or nest, with its **Parts per cycle**. Leave **Item** empty unless it's a family tool. See [Positions](./tooling/positions.md). |
| How fast the tool runs on each machine | The tool's **Cycle Rates** tab, one rate per machine | The standard rate becomes cycle rate × parts per cycle. See [Cycle Rates and Item Rates](./tooling/rates.md). |
| Which tools an item needs on a machine | **Configuration > Ops > Materials**, **Required Tooling** tab | The link from an item to its tools. See [Required Tooling](./tooling/required-tooling.md). |
| A different rate for one item with one tool (optional) | **Configuration > Ops > Materials**, **Production Rates** tab: edit the machine's rate and pick the **Tool** | Only when the item doesn't run at cycle rate × parts per cycle. See [Item Rates for a Tool](./tooling/rates.md#item-rates-for-a-tool). |
| Where the tool may be mounted (optional) | The tool's **Fits On** tab | For the tool, or every tool of its type. With no rules, any machine in its site. See [Fit Rules](./tooling/fit-rules.md). |
| Which tool is on the machine now | The Operator Station's **Tooling** card, or the machine's `Tooling` tags | See [Mounting Tools](./tooling/mounting.md). |

A tool isn't tied to one machine: it can run on any machine that uses tooling in its site, one at a time, with its own
cycle rate on each.

:::info
A tool that belongs to a site stays in that site: it can only be mounted on that site's machines, and its rates are only
for that site's machines. A tool outside any site can go on any machine. Tool names must be unique within a site, because
a machine's tag mounts a tool by name.
:::

Running below the tool's rate shows as a speed loss on the Operator Station, with the reason *Positions blocked* while a
position is blocked. See [Speed Loss](./speed-loss.md).
