# Positions

Positions describe what a tool makes each time the machine cycles: one shot of a mold, one stroke of a die. Add them on the
tool editor's **Positions** tab. The tool needs **Has positions** turned on.

![Positions tab: a 4-cavity mold](https://docs.kanoa.ai/img/tooling/tool-editor-positions.png)

| Field | Meaning |
| --- | --- |
| Number | The position's number on the tool; unique within the tool. |
| Type | Cavity, out, station, nest, pick, or pocket. A **pocket** holds another tool (an insert in a mold base or frame). It makes nothing itself, so it has no item and no parts. Pockets need **Holds inserts** on the tool. |
| Item (family tools) | **Leave it empty unless the tool is a family tool** (different parts from different positions). A position with no item (*Any item*) makes whatever item is running; one set to an item counts only when that item runs. |
| Parts per cycle | How many parts this position makes each cycle, in the item's outfeed units. The standard rate converts them to the machine's infeed units with the package count (see [Cycle Rates and Item Rates](./rates.md)). |
| Blocked | Out of service **for now**: a fault that hasn't been fixed yet. |
| Retired | Out of service **for good**: for example, a cavity that has been welded shut. |

A family mold sets each position to the item it makes. Here, cavities 1 and 2 make one part and 3 and 4 another, so each
item has 2 parts per cycle:

![Positions tab: a family mold](https://docs.kanoa.ai/img/tooling/tool-editor-positions-family.png)

:::note[A family tool's other items are co-products]
A run is for one item. When the machine's cycles come from its `Tooling/Inputs/Cycle Count`, the other items a family tool
makes in the same cycles are recorded too, as co-products: production of those items, but not of the run, its OEE or
its work order. See [Counting outfeed from cycles](./tooling-tags.md#counting-outfeed-from-cycles). A machine whose
outfeed comes from its own `Inputs/Outfeed Count` counts only the running item.
:::

## Blocked and Retired Positions

The two work differently on purpose:

- **Blocked** positions still count toward the standard rate. The machine makes fewer parts than its standard, so the
  missing parts show as a **performance loss** with the reason *Positions blocked* (see [Speed Loss](../speed-loss.md)).
  Blocking or unblocking doesn't change the rate, so it never starts a new run.
- **Retired** positions leave the standard rate from the moment they're retired, and keep their history. Retiring a
  position, or bringing it back, starts a new run if it changes the machine's rate. A retired position can't be blocked.

For example, a mold with 4 cavities at 30 cycles a minute has a standard rate of 120 a minute. Block one cavity and the
standard stays at 120 while the machine makes 90: the missing 30 are a speed loss. Retire that cavity and the standard
drops to 90 from then on.

## Changing Positions

- **Positions can't be changed while the tool is mounted.** To take a cavity out of service during a run, block it from
  the mount panel (see [Mounting Tools](./mounting.md)), then retire it on the Positions tab once the tool is off the
  machine.
- **A position that has been part of a mount can't be removed**, because the mount's history records the positions the
  tool had then. Retire it instead. A position that has never been mounted can be removed.
- A pocket that holds a tool must stay a pocket, and can't be retired while it holds one.

## Parts per Cycle

A tool's **parts per cycle** for an item is the sum of the parts of its unblocked positions set to that item or to no
item. The **standard** parts per cycle, used for the standard rate, counts the blocked positions too. Retired positions and
pockets never count. A mold base's parts per cycle comes from the inserts in its pockets.
