# Condition-Based Work

Some maintenance should follow how hard a machine works, not the calendar. Kanoa can raise a work order when an asset's run
hours or a counter reach a threshold, or when a tool is close to a life limit. You don't raise these. They show up in your
list. For example, `Machine 1 - Spindle service` comes from Machine 1's run hours, if it has been created: the Maintenance
Manager track sets it up in [Condition-Based Maintenance](../7-maintenance-manager/5-condition-based-maintenance.md).

## Recognise a Condition Work Order

A condition work order looks like any other in **Maintenance → Work Orders**. Its title says what was raised, such as
`Machine 1 - Spindle service`. It can appear a little after the threshold is passed, not at the exact moment, because Kanoa
checks the conditions on a regular cycle.

A work order can be raised by:

- **Run hours**: the asset has run a set number of hours since the last service.
- **Counter**: an asset counter, such as parts made, has reached a set count.
- **Tool life**: a tool, such as a mold, has used its **Warn at %** of a limit, for example its PM limit.

## Respond to It

1. Open the work order and read its title, priority and **Due Date**, as in [Your Work Queue](./1-your-work-queue.md).
2. Work it as in [Execute a Work Order](./2-execute-a-work-order.md): start it, follow any procedure, log your labor and
   complete it.

Completing the work order tells Kanoa the work is done. For a run-hour or counter work order, the next one is counted from
this service. For a tool-life work order, completing it resets that count, the same as recording **PM done**, **Refurbished**
or **Calibrated** on the tool's **Life** tab. So complete it only when the work is really done.

{/*
TODO: Confirm on a gateway that completing a run-hour or counter work order restarts the count from that point, as the
Developer Training describes (Kanoa records when it last generated a work order and the run-hour value at the time).
Confirm where the work order shows which condition raised it.
*/}

## Where Tool Life Warnings Show

A tool that is due or over a limit shows on the machine's info panel (the **Tooling** and **Notifications** cards) and in the
**Alert** column of the tools list. Operators see these warnings when they mount the tool. The tool editor's **Maintenance**
tab lists the tool's maintenance work orders, and you can double-click one to open it.

::embed-section{src="../../kanoa-ops/tooling/tool-life.md#statuses" collapsed="true" summary="Reference Materials: Tool Life Statuses - When a tool is due or over a limit."}

::embed-section{src="../../kanoa-ops/tooling/tool-life.md#with-kanoa-maintenance" collapsed="true" summary="Reference Materials: Tool Life with Kanoa Maintenance - How a tool raises a work order."}

## Check Your Understanding

1. Name three things that can raise a condition-based work order.
2. A tool-life work order is complete. What does completing it do to the tool's count?
3. Where can you see the work orders for one tool?

<details>
<summary>Answers</summary>

1. Run hours, a counter, or a tool reaching its **Warn at %** of a tool-life limit.
2. It resets that count, the same as recording **PM done**, **Refurbished** or **Calibrated** on the tool's **Life** tab.
3. On the **Maintenance** tab of the tool editor.

</details>
