# Record Scrap

Scrap counts against your run's quality, so it has to be counted. Like downtime, it's only useful with a reason: *300
scrapped* tells your supervisor less than *300 scrapped for coating defects*.

Many machines count waste on their own, from the PLC. You count it by hand when the machine can't, for example parts you
reject at inspection. Counting scrap needs the **Edit Operations** security function.

## Open the Count Editor

1. On the Asset Operation screen, select the **Current Run** tab under the info panel cards.
2. Tap the **Output** box. The **Count Editor** opens for the current run.

## Count Waste with a Reason

![Count Editor for the current run, Buttons tab, with waste reasons](https://docs.kanoa.ai/img/asset-operation/count-editor-buttons.png)

1. In the Count Editor, stay on the **Buttons** tab and find **Waste Counters**. Each waste reason your plant has set up
   for this machine is a button, such as *Bad Color* or *Box Crush Damage*.
2. Enter the quantity in **Count Increment**.
3. Click the button for the reason. The count is added straight away.

The **Waste** total at the top of the Count Editor goes up, and the count appears on the **Table** tab with its quantity
and reason.

:::warning
Use the reason buttons, not **Add**. **Add** counts waste with no reason.
:::

:::tip
Count scrap with the right reason even when the machine already counts the waste. Waste counted without a reason shows on
your supervisor's charts as *uncoded scrap*, so they can see how much there is, but not what to fix.
:::

## Correct a Count

If you counted the wrong quantity or reason, correct it in the Count Editor for the run. A count you correct for an
earlier run is edited the same way: tap the **Run Review** tile, select the run, and open its counts.

::embed-section{src="../../kanoa-ops/asset-operation.md#editing-production-counts" collapsed="true" summary="Reference Materials: Editing Production Counts - Infeed, outfeed and waste."}

## Check Your Understanding

1. Where do you open the Count Editor from?
2. Why does the reason matter if the machine already counts its waste?

<details>
<summary>Answers</summary>

1. The **Output** box on the **Current Run** tab.
2. Waste without a reason shows as uncoded scrap: your supervisor can see how much was lost, but not why.

</details>
