# Build a First Article Inspection

A first article inspection measures the first part of a run before production carries on. It brings together most of what
a measurement check needs: an asset and an item, several readings per check item, limits that change with the product, and
a trigger that issues it automatically. This lesson builds the CoreForge sample plant's **Machining - First Article
Inspection**, the same one Developer Training builds. Quality Inspectors then complete it in
[Measure Against Tolerances](../6-quality-inspector/3-measure-against-tolerances.md).

Building a check sheet, attributes and item sets needs the **Configure Quality** security function. Turning on quality
triggers for a machine needs **Configure Assets**.

:::note[Building your own]
On your plant's gateway, use your own item sets, attribute, check items and limits. The pattern is the same: group the
items that share a specification, give the attribute a tolerance for each group, and let the check item use the attribute.
:::

The build has three parts.

::embed-section{src="../../training/5-training-quality/03-first-article-inspection/1-item-sets-and-tolerances.md#item-sets-and-the-fai-diameter-attribute"}

::embed-section{src="../../training/5-training-quality/03-first-article-inspection/2-build-the-fai-check-sheet.md#build-the-first-article-inspection"}

::embed-section{src="../../training/5-training-quality/03-first-article-inspection/3-trigger-and-notify.md#add-the-mode-change-trigger"}

:::warning[Releasing makes it live]
Once the check sheet is released, every machine with quality triggers turned on issues an FAI each time it enters
Production. To change it after that, revise it: see [Release and Revise](./6-release-and-revise.md).
:::

## Check Your Understanding

1. Why does the **Diameter** check item use an attribute, while **Length** has a fixed range?
2. What must be turned on for a machine before a trigger can issue checks for it?
3. Where do the asset and item on an automatically issued FAI come from?

<details>
<summary>Answers</summary>

1. Diameter's specification changes with the part family, so it comes from the attribute's tolerance for each item set.
   Length is the same for every part.
2. **Enable Quality Triggers**, on the asset.
3. From the production run that put the machine into Production.

</details>
