Skip to main content

Spares for Maintenance

Maintenance depends on having the right spare on the shelf. In Inventory → Parts you can flag a part as a critical spare and set its stocking policy. Technicians and storeroom staff then use it, as in Storeroom Tasks.

Needs Kanoa Inventory

Parts, stock and storerooms are part of Kanoa Inventory, which is licensed separately from Kanoa Maintenance. Your gateway needs a Kanoa Inventory license, and an administrator must turn it on (Enable Kanoa Inventory, under Configuration → Application → Settings). Without a license it only runs in trial mode. If your plant doesn't have it, skip this lesson.

Flag a Critical Spare​

  1. Open Inventory → Parts and open the part in the Part Editor.
  2. Tick Is Critical. This flags the part as a critical spare, for reporting and prioritisation.
  3. Click Save.

Set a Stocking Policy​

A stocking policy sets the rules for one part at one storeroom. The same part can have different rules in different storerooms.

  1. In Inventory → Parts, expand the part row.
  2. Click Set Policy (the shield icon) next to the storeroom to open the Part Policy Editor.
  3. Enter Min Qty, Max Qty, Reorder Point Qty, Reorder Qty, Safety Stock and Cycle Count in days.
  4. Tick Is Stocked and click Save.
tip

Set the reorder point higher than the safety stock. The reorder point starts replenishment in good time. Safety stock is the last-resort buffer.

Reference Materials: Stocking Policies - Min, max, reorder point, safety stock and cycle count.

Stocking Policies​

A stocking policy defines how a specific part should be managed at a specific inventory location. Policies drive reorder alerts and cycle count scheduling.

Expand a part row in the Parts screen, then click the Set Policy button (shield icon) next to an inventory location to open the Part Policy Editor.

FieldDescription
Inventory AssetThe storeroom this policy applies to
Min QtyMinimum acceptable on-hand level
Max QtyMaximum stock level (used to cap reorder qty)
Reorder Point QtyWhen on-hand drops to or below this level, a reorder is triggered
Reorder QtyQuantity to order when reorder point is reached
Safety StockBuffer below the reorder point — alerts before stock hits zero
Cycle CountHow frequently (in days) this part should be physically counted
Is StockedWhether this part is actively managed at this location

Click Save to apply the policy.

tip

Set Reorder Point higher than Safety Stock. The reorder point triggers a replenishment order; safety stock is a last-resort buffer that signals an urgent shortage.


Build an Asset's Parts List​

An asset's bill of materials (BOM) lists the parts fitted to it, each at a position such as S1 Spindle bearings. Technicians then see which spares fit a machine, and you see which machines depend on a critical spare.

  1. Open Configuration → Ops → Assets, select the asset, and open its Parts tab. The tab only shows when Kanoa Inventory is on.
  2. Click Add Part or Model to Asset. Choose a Part, or a Model to add a whole equipment model's parts list.
  3. Pick the Part #, enter the Position Code, Position Name and Quantity, and click Save.

The Parts tab lists the asset's BOM: each part or assembly with its position, quantity and units.

If you can't edit the Parts tab, ask your administrator.

Reference Materials: Bill of Materials - Model BOM and asset BOM.

Bill of Materials​

A BOM defines which parts are associated with an asset, making it easy to look up what spares are needed for a given piece of equipment.

Model BOM vs Asset BOM​

Model BOMAsset BOM
ScopeAll assets of a given modelA specific asset instance
Use caseStandard parts list for an equipment typeOverrides or additions for a particular machine
FunctionaddModelBomItemaddAssetBomItem

Adding a BOM Item​

In the UI, open Configuration → Ops → Assets, select the asset and open its Parts tab (shown when Kanoa Inventory is on). Click Add Part or Model to Asset, choose a Part or a Model, enter the Position Code, Position Name and Quantity, and save.

Via script:

# Add a part to an asset's BOM
assetBomId, err = system.kanoa.inventory.addAssetBomItem({
'assetId': assetId,
'partId': partId,
'quantity': 2,
'uomId': uomId,
'positionCode': 'P1-A',
'positionName': 'Drive Shaft Bearing',
}, userId)

Retrieving a BOM​

# Full flattened BOM for an asset
bom = system.kanoa.inventory.getAssetBom({'assetId': assetId})

# Full flattened BOM for a model
bom = system.kanoa.inventory.getModelBom(modelId)

Worked Example​

The CoreForge sample plant builds Machine 1's parts list, the same as Developer Training.

Build an Asset BOM​

Each BOM item links a part to a position on the asset, such as S1 Spindle bearings, with the quantity fitted there.

Build Machine 1's BOM
  1. Navigate to Configuration → Ops → Assets, select Machine 1, and open its Parts tab. (The tab only shows when Kanoa Inventory is on.)

  2. For each row below, click Add Part or Model to Asset, choose Part, pick the Part #, enter the Position Code, Position Name and Quantity, and click Save:

    Position CodePosition NamePartQuantity
    T1Turning tool insertsCF-INS-CNMG4324
    S1Spindle bearingsCF-BRG-70142
    C1Coolant filterCF-FLT-COOL101
  3. The Parts tab lists Machine 1's BOM: each part or assembly, its position, quantity and units.

To load BOMs for many machines at once, script them with addAssetBomItem: see Script Parts and Stock.

Model BOMs

If you had eight identical machining centers, you'd create an equipment model, give it the BOM once, and add only the differences to each machine's asset BOM. Add Part or Model to Asset can add a model to an asset as well as a part.

Reference Materials: Bill of Materials

Bill of Materials​

A BOM defines which parts are associated with an asset, making it easy to look up what spares are needed for a given piece of equipment.

Model BOM vs Asset BOM​

Model BOMAsset BOM
ScopeAll assets of a given modelA specific asset instance
Use caseStandard parts list for an equipment typeOverrides or additions for a particular machine
FunctionaddModelBomItemaddAssetBomItem

Adding a BOM Item​

In the UI, open Configuration → Ops → Assets, select the asset and open its Parts tab (shown when Kanoa Inventory is on). Click Add Part or Model to Asset, choose a Part or a Model, enter the Position Code, Position Name and Quantity, and save.

Via script:

# Add a part to an asset's BOM
assetBomId, err = system.kanoa.inventory.addAssetBomItem({
'assetId': assetId,
'partId': partId,
'quantity': 2,
'uomId': uomId,
'positionCode': 'P1-A',
'positionName': 'Drive Shaft Bearing',
}, userId)

Retrieving a BOM​

# Full flattened BOM for an asset
bom = system.kanoa.inventory.getAssetBom({'assetId': assetId})

# Full flattened BOM for a model
bom = system.kanoa.inventory.getModelBom(modelId)

Check Your Understanding​

  1. What does Is Critical do?
  2. Where do you set a part's stocking policy?
  3. Which should be higher, the reorder point or the safety stock?
Answers
  1. It flags the part as a critical spare, for reporting and prioritisation.
  2. In Inventory → Parts: expand the part and click Set Policy next to the storeroom.
  3. The reorder point.